System Control LCD Panel
Located on the slide out panel just to the right of the monitor

Main Menu Buttons

• VCR button switches to VCR menu and controls
• DOC CAM button sends the document camera input to the projector
• Laptop button sends the laptop input to the projector (document camera must also be powered on and switched to EXT via the INT/EXT button)
• PC button sends desktop input to the projector
• Slides switches to the menu and controls for the 35mm slide projector
• Proj. On powers on the (ceiling mounted) data projector
• Proj. Off powers off the (ceiling mounted) data projector
• Pict. Mute On hides input to data projector
• Pict. Mute Off reveals input to data projector

VCR Menu Buttons

• Play button plays VHS tape
• Stop button stops VHS tape
• Pause button pauses VHS tape
• FFWD button fast forwards VHS tape
• REW button rewinds VHS tape

35mm Slide Projector Menu Buttons

• PWR button powers on 35mm slide projector
• FWD displays the next slide
• REV displays the previous slide
• FOC+ focuses the image in
• FOC- focuses the image out

Display Document Camera Through Projector

• Make sure projector is on (indicated by green light on projector). If projector is not on, press "PROJ ON" button on the LCD Main Menu.
• Press "DOC CAM" button (on LCD Main Menu) until the document camera input is displayed on the projector.

Document Camera Controls (on document camera)

• Press Power to toggle between ON and OFF
• Press Lamp to toggle between upper and lower lighting
• Press INT/EXT to toggle between document camera and laptop (if present)
• Press AWC for automatic color balance
• Press Freeze to freeze/unfreeze image
• Press NEGA/POSI for negative/positive image
• Press Iris to adjust brightness
• Press Zoom to zoom image in/out
• Press Focus to focus image

Display Desktop Computer Through Projector

• Make sure projector is on (indicated by green light on projector). If projector is not on, press "PROJ ON" button on the LCD Main Menu.
• Press "PC" button (on LCD Main Menu) until the desktop computer input is displayed on the projector.

Display Laptop Computer Through Projector

• Make sure projector is on (indicated by green light on projector). If projector is not on, press "PROJ ON" on LCD Main Menu.
• Make sure document camera is on (indicated by green light on document camera)
• Plug free cable from port (near LCD control panel) into back of laptop
• Press Laptop button (on LCD Main Menu) until laptop input is displayed on the screen
• Press INT/EXT button on front of document camera until laptop is displayed

*Note: If the laptop's screen is not displayed or the projector reads "No Sync", press the Fn (Function) key on the together with the corresponding CRT/LCD key (just above the number keys) on the laptop to toggle its display out to the projector via the document camera.